DXDirector Software
DxDirector II and DxDirector Setup software is a Windows™ based program for the setup, configuration, editing, and control of DX2 Dimming systems. DxDirector II is the latest software that provides full support for Collage Impress Touch stattions.The recommended minimum requirements are a PC running Windows™ XP SP1 through Vista. DxDirector will NOT run on earlier versions of Windows™.
DxDirector || and DxDirector can communicate with Dx racks using RS-232 which is standard or through ethernet. If RS-232 is used, the PC must also have an RS-232 "COM" port or alternately a USB to RS-232 converter cable with accompanying driver software. If your Dx rack has an ethernet connection and you wish to control it that way your PC will need a Cat-5 ethernet connection to connect to the Dx rack network.
DxDirector II Downloads
There are two downloads available. One is DXDirector II, the other is firmware update for the DX2 dimming system. The firmware package is installed on the PC with DxDirector II which will manage the actual firmware update using these installed files. DO NOT download these files unless you are already using DxDirector II and the firmware in the rack is V6.0 or greater.
Legacy DxDirector Downloads
There are two downloads available. One is DXDirector, the other is firmware update for the DX2 dimming system. The firmware package is installed on the PC with DxDirector which will manage the actual firmware update using these installed files.
| If you have any problems installing this software, call us or contact via email: |